Advance Flow Image
Home / Forum / Components Discussions / Advance Flow Image
-
-
If you click on the linked image, is there a way to not open the linked site in a new window?
Thanks.
# / posted on Jun 04, 2009
-
Hi camronelli…
yes the new window can be self window … I just add the auto play feature please contact me at viptehnology@gmail.com and I will send you the source with the modifications you need …
Regards,
VipTehnology
# / posted on Jun 04, 2009
-
Hi Vip,
It’s Kepler, congratulation about this component! very good! The autoplay is very fine!
Cheers!
# / posted on Jun 04, 2009
-
Hi Kepler …
thanks for the nice comment and for the autoplay ideea …
Regards,
VipTehnology
# / posted on Jun 04, 2009
-
How do I make the slide show start midway through the pictures…in other words I want the slider to load on picture 10 instead of picture 2. Is this possible? If so, how do I acomplish this?
# / posted on Jun 06, 2009
-
Hi bharris007…
Please check your email … I just send you the source with a new variable in component inspector:
Active Picture – this variable set the active picture that appears on the load of the component…
Regards,
VipTehnology
# / posted on Jun 09, 2009
-
Hi Iam interested on your gallery, but I have some quesstions:
1. Could I increase te different gallerys by XML or I must to do it by flash?
2. Could I link every picture with a lightbox to see it full screen?
Thanks in advance.
# / posted on Jun 19, 2009 -
Hi kike …
1. The gallerys number and all the data’s are given in the XML file and you don’t need flash for that
2. Yes, I just test the lightbox and it works …
Regards,
VipTehnology
# / posted on Jun 20, 2009
-
Hi!
Your component is exactly what I´ve been looking for, except I want it to autoplay when loaded. I can see in the comments that you added this feature, but I would like to seee how it works before buying. Do you have a link or something?
Regards Tommy
# / posted on Jun 26, 2009 -
Hi I am new to flash, only been using for a few weeks. very simple question: how to you ‘install’ the component and put it on stage. thanks heaps
# / posted on Jun 30, 2009
-
Hi intherye….
you can find the component in the library, you don’t have to install it or something else just open the .fla that you get from FlashComponents …. copy from the library the Flow gallery component or from the Stage the viptehnology signe … and paste it in your file … The component is very easy to use just drag and drop into the Stage … if you can get this done write an email to viptehnology@gmail.com and you will get help …
Regards,
VipTehnology
# / posted on Jun 30, 2009
-
Hi Vip
I need to use your component in images bigger than sample. It’s like widht 459px and height 633 px. I changed the parameters of Flow gallery and dimensions of stage, but does’t work well. I could’t see the whole image. Look that: http://www.popbr.biz/flash/component.swf
Tks! Pop
# / posted on Jul 04, 2009
-
Hi popcarvalho…
yes I see what were your modifications but as you see the pictures have a mirror effect and a little menu down so you must make a bigger stage and a bigger Component Height this 2 variagles should be at least 2 * picture Hieght … if can’t make this thing work contact me at viptehnology@gmail.com with your sizes and I will make some modifications probably make a little less mirror or something …
Regards,
VipTehnology
# / posted on Jul 04, 2009
-
Hi Vip,
thank you, this is a great tool. However, I still do not know what is a “Stage” where I could drag and drop the component into to edit the file parameters. Pls. help.
Regards,
zzew234
# / posted on Jul 13, 2009
-
Hi zzew234…
when you open the .fla file with an flash editor like Flash 8 or Flash CS3 you will find the vip logo on a white background … the white background is the Stage I’m talking about … click on the logo and then press Shift+F7 and the component isnpector will appear … edit the variables and you have your own Flow Component…
Regards,
VipTehnology
# / posted on Jul 13, 2009
-
Hi vip,
thank you, it was helpful. However, editing the parameters does not always give the results one would expect from reading the name of the parameter. So it is quite tricky. Using trial and error method it’s still possible to get the desired result.
Best regards,
zzew234
# / posted on Jul 16, 2009
-
Hi zzew234…
thank’s for the comment probably I wasn’t very suggestive with some parameters name, this why the configuretion can be tricky …
Regards,
VipTehnology
# / posted on Jul 17, 2009
-
Hi there – is there a way to make the pictures open up big in a new window when you click on them? Instead of having a link to a website?
Thanks
# / posted on Jul 19, 2009
-
Hi nobbyryan …
we made a modification for a user and the pictures open a lightbox gallery … if you are interested give an email to viptehnology@gmail.com
Regards,
VipTehnology
# / posted on Jul 19, 2009
-
Just sent you an email about your Light Box solution to this cool slider.
Eric B
# / posted on Jul 24, 2009
-
Hi ebose…
please check your email address and let me know you got my message about the lightbox sources …
Regards,
VipTehnology
# / posted on Jul 25, 2009
-
Hello vip,
I have problem with this flash, I have tried to contact you by several emails, but I have not received your reply.
regards,
Jian
# / posted on Jul 28, 2009
-
Hi yuanjianxiong…
sorry about that … I just send the support emails …
Regards,
VipTehnology
# / posted on Jul 28, 2009
-
Hello,
I installed this control inside of a full flash site on one of the many flash pages. There is no html page “under” this particular flash page, so I need to know how to call the AC_RunActiveContent.js from “inside” the FLA file. I can get the thumbnails and the slider to show up, but none of the text (lower menu or picture descriptions) shows up.
Can you give me the line of code (example) to insert into the FLA file and tell me where to place the code?
Thank You,
Ken
# / posted on Aug 26, 2009
-
Hi …
To use the component just copy the Flow gallery that is on the library of the source you got from FlashComponents … in the library of your .fla file, after that drag the component in your stage where you would like to appear … As I realize you did this already and you got the thumbnails and the slider but no text and this is because you did not copy the fonts from the original source: menuFont and titleFont … copy them and you will get the text … You can contact me for any problem at viptehnology@gmail.com
Regards,
VipTehnology
# / posted on Aug 26, 2009
-
-
Hi
Just bought yor mighty fine piece of work. Thanks, it’s great…
I can see though in the comments that you offer autoplay as well as lightbox and Active Picture.
Is it possible for me to get the source code for that as well..?
Best,
Balle
# / posted on Aug 28, 2009
-
Hi balle …
please check your email and let me know that you got the sources …
Regards,
VipTehnology
# / posted on Aug 28, 2009
